Current Sense Amplifier / Reference and Comparator
LT6118 Current Sense Amplifier, Reference and Comparator
with POR
Features
Description
n Current Sense Amplifier –...
Description
LT6118 Current Sense Amplifier, Reference and Comparator
with POR
Features
Description
n Current Sense Amplifier – Fast Step Response: 500ns – Low Offset Voltage: 200µV Maximum – Low Gain Error: 0.2% Maximum n Internal 400mV Precision Reference n Internal Comparator – Power-On Reset Capability – Fast Response Time: 500ns – Total Threshold Error: ±1.25% Maximum n Wide Supply Range: 2.7V to 60V n Supply Current: 450µA n Specified for –40°C to 125°C Temperature Range n Available in 8-Lead MSOP and 8-Lead (2mm × 3mm)
DFN Packages
Applications
n Overcurrent and Fault Detection n Current Shunt Measurement n Battery Monitoring n Motor Control n Automotive Monitoring and Control n Industrial Control
The LT®6118 is a complete high side current sense device that incorporates a precision current sense amplifier, an integrated voltage reference and a latching comparator. The comparator latch functionality can be enabled or disabled and the comparator can be configured to reset upon power-on. The input and the open-drain output of the comparator are independent from the current sense amplifier. The comparator trip point and amplifier gain are configured with external resistors. The overall propagation delay of the LT6118 is typically only 1.4µs, allowing for quick reaction to overcurrent conditions. The 1MHz bandwidth allows the LT6118 to be used for error detection in critical applications such as motor control. The high threshold accuracy of the comparator, ...
Similar Datasheet