4/6 CHANNEL CHARGE PUMP CURRENT SINK
Data Sheet
4/6 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER
AP3606/AP3607
General Description
The AP3606 and AP360...
Description
Data Sheet
4/6 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIVER
AP3606/AP3607
General Description
The AP3606 and AP3607 are step-up DC-DC converters based on 1x/1.5x charge pump and low dropout current sink, which helps them maintain the highest efficiency. The AP3606 is specially designed to drive up to 4 WLEDs in backlight display while the AP3607 is designed for 6 WLEDs.
These devices provide up to 20mA current for each WLED. There are totally 16 steps of current control, which is achieved through a digital pulse dimming function on EN pin. Additionally, 1MHz high switching frequency enables the use of small external capacitors. Internal soft-start circuitry prevents excessive inrush current during start-up and mode transition.
The supply voltage ranges of AP3606 and AP3607 are from 2.7V to 5.5V which make them ideally suit for applications powered by Li-ion battery.
These ICs are available in the tiny package of QFN-3×3-16.
Features
Regulated Output Current with ±3% Matching Drives up to 4 WLEDs at 20mA Each (AP3606)
Drives up to 6 WLEDs at 20mA Each (AP3607) 16 Steps Brightness Control Using Pulse Signal
Dimming Wide Operating Voltage Range: 2.7V to 5.5V High Operating Frequency: 1MHz Auto 1x/1.5x Charge Pump Mode Selection Built-in Soft-start Output Over Voltage Protection Built-in UVLO Built-in OTSD Operating Temperature Range: -40°C to 85°C
Applications
Mobile Phone PDA MP3/4
QFN-3×3-16
Figure 1. Package Type of AP3606/AP3607
Jan. 2013...
Similar Datasheet