Peak 3A CMOS LDO Regulator with Enable and Power Good
Data Sheet AP2132A
General Description
The AP2132A series are po...
Peak 3A CMOS LDO
Regulator with Enable and Power Good
Data Sheet AP2132A
General Description
The AP2132A series are positive voltage
regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power
transistor, a resistor network for setting output voltage, a current limit circuit for current protection, and a chip enable circuit.
The AP2132A have features of large current, low dropout voltage, high output voltage accuracy and low input voltage. The AP2132A provide a power good (PG) signal to indicate if the voltage level of VOUT reaches 92% of its rating value. And it operates with a VIN as low as 1.4V and VCTRL voltage 5V with output voltage programmable as low as 0.6V.
The AP2132A are available in 1.2V, 1.5V, 1.8V, 2.5V fixed output voltage versions and adjustable output voltage version. The fixed versions integrate the adjust resistors. It is also available in an adjustable version, which can set the output voltage with external resistor. If the pin of adjustable output voltage is to ground, it will switch to fixed output voltage.
The AP2132A series are available in PSOP-8 package.
Features
Adjustable Output: 0.6V to 3.0V Low Dropout Voltage: 300mV at IOUT=2A,
VOUT=1.2V Over Current and Over Temperature Protection Enable Pin PSOP-8 Package with Thermal Pad Maximum Output Current: 3A (Peak) High Output Voltage Accuracy: 2% VOUT Power Good Signal Excellent Line/Load Regulation
Applications
Notebook
Mar. 201...