Octal Low-Side Relay Driver
Octal Low-Side Relay Driver
NCV7754
The NCV7754 is an automotive eight channel low−side driver providing drive capabilit...
Description
Octal Low-Side Relay Driver
NCV7754
The NCV7754 is an automotive eight channel low−side driver providing drive capability up to 500 mA per channel. Output control is via a SPI port and offers convenient reporting of faults for open load (or short to ground), over load, and over temperature conditions. Additionally, parallel control of the outputs is addressable (in pairs) via the INx pins.
A dedicated limp−home mode pin (LHI) enables OUT1−OUT4 while disabling OUT5−OUT8.
Each output driver is protected for over load current and includes an output clamp for inductive loads.
The NCV7754 is available in a SSOP−24 fused lead package.
Features
8 Channels 500 mA Low−Side Drivers
♦ RDS(on) 0.8 W (Typ), 1.6 W (Max)
16−bit SPI Control
♦ Frame Error Detection (8−bit) ♦ Daisy Chain Capable
Parallel Input Pins for PWM Operation Power Up Without Open Circuit Detection Active (for LED
applications)
Low Quiescent Current in Sleep and Standby Modes Limp Home Functionality 3.3 V and 5 V Compatible Digital Input Supply Range Fault Reporting
♦ Open Load Detection (selectable) ♦ Over Load ♦ Over Temperature
Power−on Reset (VDD, VDDA) SSOP−24 Package (internally fused leads) NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
These are Pb−Free Devices
Applications
Automotive Body Control Unit Automotive Engine Control Unit Relay Driver LED Driver Stepper Motor Driver
DATA SH...
Similar Datasheet