ACMG4013-05S-443-006

APPROVAL SHEET FOR MICROPHONE CUSTOMER MODEL DIMENSIONAL SENSITIVITY ACMG4013-05S-443-006 Φ4.0×1.3 -44±3dB CUSTOMER APPROVER CHECKER DATE PREP CHKD 2009-09-02 Lin Meng Fang Tao P1/11 PRODUCT SPECIFICATIONS TYPE: Back Electret Condenser Microphone Number: ACMG4013-05S-443-006 The Microphone including all material and solder joints must be free from Lead and other restricted substances as per customer requirement. 1. Electrical Characteristics Test Condition (Vs=2.0V RL=2.2KΩ Ta=20℃ R.H.=65%) Item Symbol Test Conditions Minimum Standard Maximum Unit Sensitivity S Pin=1Pa , f=1kHz -47 -44 -41 dB Output Impedance Zout Pin=1Pa , f=1kHz 2.2 kΩ Directivity Omni directional Current consumption I Vs=2.0V, RL=2.2KΩ 400 μA S/N ratio (A) S/N (A) Pin=1Pa, f=1kHz(A Curve) 58 dB Decreasing Voltage Characteristic Pin=1Pa , f=1kHz △S Vs=2.0~1.5V -3 dB Operating Voltage DC 1 2 10 V Maximal Input Sound Pressure Level MISPL f=1kHz, distortion≤2% 104 dB Relative Response (dB) Typical Frequency Response Curve +20 +10 0 +6 -10 -20 -30 20 50 -6 100 +3 +3 -3 -3 200 500 1000 Frequency (Hz) 2000 +8 +5 -3 -6 5000 10000 20000 Frequency(Hz) 100 200 900 1000 1200 2000 4000 5000 Upper Limit(dB) 6 3 3 0 3 3 3 5 Lower Limit(dB) -6 -3 -3 0 -3 -3 -3 -3 2. Microphone Mechanical Drawing Unit: mm 8000 8 -6 P2/11 3. Standard test fixtures Power amplifier B&K 2716C ECM drive circuit (Test circuit) Vc=2.0V,RL=2.2K Speaker Tannoy 16" Std.Mic. B&K4191 50cm E...