UPD78F0058
User’s Manual
µPD780058, 780058Y Subseries
8-Bit Single-Chip Microcontrollers
µPD780053
µPD780053Y
µPD780054
µPD780...
Description
User’s Manual
µPD780058, 780058Y Subseries
8-Bit Single-Chip Microcontrollers
µPD780053
µPD780053Y
µPD780054
µPD780054Y
µPD780055
µPD780055Y
µPD780056
µPD780056Y
µPD780058
µPD780058BY
µPD780058B µPD78F0058Y
µPD78F0058 µPD780053Y(A)
µPD780053(A) µPD780054Y(A)
µPD780054(A) µPD780055Y(A)
µPD780055(A) µPD780056Y(A)
µPD780056(A) µPD780058BY(A)
µPD780058B(A)
Document No. U12013EJ3V2UD00 (3rd edition) Date Published February 2003 N CP (K)
Printed in Japan
1997, 2003
[MEMO] 2 User's Manual U12013EJ3V2UD
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity. Semiconductor devices must be stored and transported in an anti-static container, static shielding bag or conductive material. All test and measurement tools including work bench and floor should be grounded. The operator should be grounded using wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need to be taken for PW boards with semiconductor devices on it.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS Note: No connection ...
Similar Datasheet