3A Ultra-Small Controlled Load Switch
NCP336, NCP337
3 A Ultra-Small Controlled Load Switch with Auto-Discharge Path
Description
The NCP336 and NCP337 are v...
Description
NCP336, NCP337
3 A Ultra-Small Controlled Load Switch with Auto-Discharge Path
Description
The NCP336 and NCP337 are very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.
Indeed, thanks to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used.
Output discharge path is also embedded to eliminate residual voltages on the output rail for the NCP337 part only.
Proposed in a wide input voltage range from 1.2 V to 5.5 V, in a small 1 x 1.5 mm WLCSP6, pitch 0.5 mm.
Features
1.2 V − 5.5 V Operating Range 21 mW P MOSFET at 4.5 V DC Current up to 3 A Output Auto−Discharge Active High EN Pin WLCSP6 1 x 1.5 mm This Device is Pb−Free, Halogen Free/BFR Free and is RoHS
Compliant
Applications
Mobile Phones Tablets Digital Cameras GPS Portable Devices
VCC
V+
LS
SMPS
DCDC Converter
or
LDO
ENx
1μF
http://onsemi.com
WLCSP6 FC SUFFIX CASE 567FH
PIN CONNECTIONS 12
A OUT
IN
B OUT
IN
C GND
EN
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information on page 8 of this data sheet.
NCP336 or NCP337
A2 B2 C2
ENy
IN OUT IN OUT EN
A1 B1 100n
C1 GND
0
Platform IC’n
LS Figure 1. Typical Application Circuit
Platform IC’n+1
© Semiconductor Components Industries, LLC, 2012
September, 2012 − Rev. 2
1
Publication Order Number: NCP336/D
NCP336, NCP337
Table 1. PIN FUNCTION DESCRIP...
Similar Datasheet