Temperature Monitor
DATA SHEET www.onsemi.com
+15C Temperature Monitor
with Series Resistance
Cancellation
SOIC−8 NB CASE 751
MSOP8 CAS...
Description
DATA SHEET www.onsemi.com
+15C Temperature Monitor
with Series Resistance
Cancellation
SOIC−8 NB CASE 751
MSOP8 CASE 846AB
ADT7461
The ADT7461 is a dual-channel digital thermometer and under/over temperature alarm intended for use in PCs and thermal management systems. It is pin- and register-compatible with the ADM1032. The ADT7461 has three additional features: series resistance cancellation (where up to 3 kW (typical) of resistance in series with the temperature monitoring diode may be automatically cancelled from the temperature result, allowing noise filtering); configurable ALERT output; and an extended, switchable temperature measurement range. The ADT7461 can accurately measure the temperature of a remote thermal diode to ±1°C and the ambient temperature to ±3°C. The temperature measurement range defaults to 0°C to +127°C, compatible with the ADM1032, but can be switched to a wider measurement range of −55°C to +150°C. The ADT7461 communicates over a 2-wire serial interface compatible with system management bus (SMBus) standards. An ALERT output signals when the on-chip or remote temperature is out of range. The THERM output is a comparator output that allows on/off control of a cooling fan. The ALERT output can be reconfigured as a second THERM output, if required.
The SMBus address of the ADT7461 is 0x4C.
Features
On-Chip and Remote Temperature Sensor 0.25°C Resolution/1°C Accuracy on Remote Channel 1°C Resolution/3°C Accuracy on Local Channel Automat...
Similar Datasheet