Mask 4-bit Microcontroller
SH66K31C
Mask 4-bit Micro-controller
Features
SH6610C-based single-chip 4-bit micro-controller
ROM: 1024 X 16 bit...
Description
SH66K31C
Mask 4-bit Micro-controller
Features
SH6610C-based single-chip 4-bit micro-controller
ROM: 1024 X 16 bits
RAM: - 32 X 4 bits System Register - 48 X 4 bits data memory
Operation Voltage: - VDD = 1.8V - 3.6V - VDD = VLPD - 3.6V (LPD enable)
14 CMOS bi-directional I/O pins
4-level Stack (including interrupts)
One 8-bit auto re-loaded timer/counter
Warm-up timer
Powerful interrupt sources: - Timer0 interrupt - External interrupts: PORTA / B /C (Falling edge)
Oscillator (code option) - Ceramic resonator: 400kHz - 4MHz - External input clock: 400kHz - 4MHz
Instruction cycle time: - 4/fOSC - 16/fOSC
Two low power operation modes: HALT and STOP
Reset - Built-in power-on reset (POR)
Built-in Pull-high resistor for reset pin (code option)
Built-in remote control carrier synthesizer by software
option
Port interrupt source selection (code option)
Chip form or 20-pin DIP/ TSSOP package
General Description
SH66K31C is a single-chip 4-bit micro-controller. This device integrates an SH6610C CPU core, RAM, ROM, timer, and programmable input/output driving buffers and carrier synthesizer. The standby function, which can be used to stop/start the ceramic resonator oscillation, facilitates the low power dissipation of the system. The SH66K31C is suitable for infrared remote control transmitter application.
Pin Configuration
PORTC.2 PORTC.3 PORTD.0 PORTD.1
REM
VDD
OSCO OSCI
GND RESET
1 2 3 4 5 6 7 8 9
10
SH66K31C
20 PORTC.1 19 PORTC.0 18 PORT...
Similar Datasheet