Green
AH266
HIGH VOLTAGE HALL EFFECT LATCH
Description
AH266 is an integrated Hall sensor with output drivers design...
Green
AH266
HIGH VOLTAGE HALL EFFECT LATCH
Description
AH266 is an integrated Hall sensor with output drivers designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary Darlington open-collector drivers for sinking large current loads. An internal band-gap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range.
If a magnetic flux density (B) is larger than operation point (Bop), DO will turn on (low) and DOB will turn off (high). The output state is latched prior to reaching release point (Brp). If B< Brp, DO will turn off and DOB will turn on. AH266 is rated for operation over temperature range from -20°C to +85°C and voltage range from 4V to 28V. The devices are available in low cost die forms or rugged 4 pin SIP packages.
Pin Assignments ( Top View ) 266
12 3 4
SIP-4
Features
On-Chip Hall Plate Operating Voltage: 4V to 28V Output Current: 400mA (Continuous, +25°C) Reverse Protection Diode Only for Chip Reverse Power
Connecting (Note 1) Output Protection Zener Breakdown VZ = 62V (Typ.) Lead Free package: SIP-4 SIP-4: Available in “Green” Molding Compound (No Br, Sb) RoHS Compliant (Note 2)
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antim...