Surface Mount Standard Rectifiers
DSR0.3A THRU DSR0.3M
1.8± 0.1
SOD-123FL
Cathode Band Top View
2.8 0.1
0.6 0.25
3.7 0.2
Dimensions in millimeters
0.10...
Description
DSR0.3A THRU DSR0.3M
1.8± 0.1
SOD-123FL
Cathode Band Top View
2.8 0.1
0.6 0.25
3.7 0.2
Dimensions in millimeters
0.10-0.30 0.2
Surface Mount Standard Rectifiers
Reverse Voltage - 50 to 1000 Volts Forward Current - 0.3 Ampere
Features Low profile space Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering: 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC
Mechanical Date
Case: JEDEC SOD-123FL molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D Polarity: Laser band denotes cathode end Weight: 0.017gram
1.3± 0.15
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
SYMBOLS S03A S03B S03D S03G S03J
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage
VRRM VRMS VDC
50 100 200 400 35 70 140 280 50 100 200 400
600 420 600
Maximum average forward rectified current at TA=65 C (NOTE 1)
I(AV)
0.3
Peak forward surge current
8.3ms single half sine-wave superimposed on
IFSM
15.0
rated load (JEDEC Method) TL=25 C
Maximum instantaneous forward voltage at 0.3A
VF
1.1
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C
IR
5.0 50.0
Typical junction ...
Similar Datasheet