DatasheetsPDF.com

FT240XQ-x Dataheets PDF



Part Number FT240XQ-x
Manufacturers Future Technology Devices
Logo Future Technology Devices
Description USB 8-BIT FIFO
Datasheet FT240XQ-x DatasheetFT240XQ-x Datasheet (PDF)

FT240X USB 8-BIT FIFO IC Datasheet Version 1.6 Document No.: FT_000626 Clearance No.: FTDI# 259 Future Technology Devices International Ltd. FT240X (USB 8-BIT FIFO IC) The FT240X is interface with a USB to parallel FIFO the following advanced  features:  Single chip USB to parallel FIFO bidirectional  data transfer interface.  Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-time-  programmable (MTP) memory.

  FT240XQ-x   FT240XQ-x


Document
FT240X USB 8-BIT FIFO IC Datasheet Version 1.6 Document No.: FT_000626 Clearance No.: FTDI# 259 Future Technology Devices International Ltd. FT240X (USB 8-BIT FIFO IC) The FT240X is interface with a USB to parallel FIFO the following advanced  features:  Single chip USB to parallel FIFO bidirectional  data transfer interface.  Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-time-  programmable (MTP) memory, storing device descriptors and FIFO I/O configuration.   Fully integrated clock generation with no external crystal required plus optional clock  output selection enabling glue-less interface to external MCU or FPGA.   Data transfer rates up to 1Mbyte / second.   512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to  allow for high data throughput.   FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the  requirement for USB driver development in most cases.   Configurable FIFO interface I/O pins.   Synchronous and asynchronous bit bang  interface options.  USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging. Device supplied pre-programmed with unique USB serial number. USB Power Configurations; supports bus- powered, selfpowered and bus-powered with power switching. Integrated +3.3V level converter for USB I/O. True 3.3V CMOS drive output and TTL input; operates down to 1V8 with external pull-ups. Configurable I/O pin output drive strength; 4 mA(min) and 16 mA(max). Integrated power-on-reset circuit. Fully integrated AVCC supply filtering - no external filtering required. +5V Single Supply Operation. Internal 3V3/1V8 LDO regulators Low operating and USB suspend current; 8mA (activetyp) and 125uA (suspend-typ). UHCI/OHCI/EHCI host controller compatible. USB 2.0 Full Speed capable. Extended operating temperature range; -40 to 85⁰C. Available in compact Pb-free 24 Pin SSOP and QFN-24 packages (both RoHS compliant). Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this produ ct. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright © Future Technology Devices International Limited 1 1 Typical Applications  Upgrading Legacy Peripherals to USB   Utilising USB to add system modularity   Incorporate USB interface to enable PC  transfers for communication development system   Cellular and Cordless Phone USB data transfer  cables and interfaces   Interfacing MCU/PLD/FPGA based designs to USB   USB Audio and Low Bandwidth Video data  transfer  USB Smart Card Readers  1.1 Driver Support FT240X USB 8-BIT FIFO IC Datasheet Version 1.6 Document No.: FT_000626 Clearance No.: FTDI# 259 USB Industrial Control USB MP3 Player Interface USB FLASH Card Reader and Writers Set Top Box PC - USB interface USB Digital Camera Interface USB Software and Hardware Encryption Dongles USB Instrumentation USB dongle implementations for Software/ Hardware Encryption and Wireless Modules Provides detection of dedicated charging ports for charging batteries in portable devices. Royalty free VIRTUAL COM PORT (VCP) DRIVERS for...  Windows 10 32, 64-bit  Windows 8 / 8.1 32, 64-bit  Windows 7 32,64-bit  Windows Vista and Vista 64-bit  Windows XP and XP 64-bit  Windows XP Embedded  Server XP / 2003 /2008 / 2016  Windows CE 4.2-5.2, 6.0/7.0, 2013  Mac OS-X  Linux 3.2 and greater  Android Royalty free D2XX Direct Drivers (USB Drivers + DLL S/W Interface)  Windows 10 32, 64-bit  Windows 8 / 8.1 32, 64-bit  Windows 7 32,64-bit  Windows Vista and Vista 64-bit  Windows XP and XP 64-bit  Windows XP Embedded  Server XP / 2003 /2008 / 2016  Windows CE 4.2-5.2, 6.0/7.0, 2.


FT240X FT240XQ-x FT240XS-x


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)