USB I2C SLAVE
FT200XD USB I2C SLAVE IC Datasheet Version 1.5
Document No.: FT_000628 Clearance No.: FTDI# 265
Future Technology Devic...
Description
FT200XD USB I2C SLAVE IC Datasheet Version 1.5
Document No.: FT_000628 Clearance No.: FTDI# 265
Future Technology Devices International Ltd. FT200XD
(USB I2C SLAVE IC)
The FT200XD is a USB to I2C interface with the following advanced features:
Single chip USB to I2C interface.
Up to 3.4MHz, high speed mode, I2C supported
Entire USB protocol handled on the chip. No USB specific firmware programming required.
Fully integrated 2048 byte multi-timeprogrammable (MTP) memory storing device
descriptors and CBUS I/O configuration.
Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface
to external MCU or FPGA.
512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to
allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the requirement for USB driver development in
most cases.
Unique USB FTDIChip-ID™ feature.
Configurable CBUS I/O pin.
Transmit and receive LED drive signals.
USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging.
Device supplied pre-programmed with unique USB serial number.
USB Power Configurations; supports buspowered, self-powered and bus-powered with power switching.
Integrated +3.3V level converter for USB I/O.
True 3.3VCMOS drive output ...
Similar Datasheet