SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
P6SMA***A
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Pulse Power
FEATURES
* Plastic package has Underwr...
Description
P6SMA***A
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Pulse Power
FEATURES
* Plastic package has Underwriters Laboratory Flammability Classification 94V-O
* For surface mounted applications in order to optimize board space
* Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Excellent clamping capability * Repetition Rate (duty cycle):0.01% * Fast response time: typically less than 1.0ps
from 0 Volts to V(BR) for unidirectional types
* Typical IR less than 1mA above 10V
* High temperature soldering guaranteed: 260°C/10 seconds,
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic Terminals: Axial leads, solderable per
MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.0026 ounce, 0.075 gram
1.DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types P6SMA62CA
We declare that the material of product compliance with ROHS requirements
Electrical characteristics apply in both directions.marking like Uni; without color band.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING Peak Power Dissipation at TA=25°C, TP=1ms(Note 1)
SYMBOL PPPM
Steady State Power Dissipation at TL=75°C(Note 2)
PM(AV)
Peak Forward Surge Current, 8.3ms Single Half Sine-
Wave Superimposed on Rated Load(JECED...
Similar Datasheet