1A Standalone Linear Li-lon Battery Charger
SE9018
1A Standalone Linear Li-lon Battery Charger
Description
Features
The SE9018 is a complete constant - current &...
Description
SE9018
1A Standalone Linear Li-lon Battery Charger
Description
Features
The SE9018 is a complete constant - current & constant-voltage linear charger for single cell lithium-ion batteries. Its PSOP8 package and low external component count make the SE9018 ideally suited for portable applications. Further more , the SE9018 can work within USB and wall adapter.
No blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The SE9018 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is
Programmable Charge Current Up to 1000mA No MOSFET, Sense Resistor or Blocking
Diode Required Complete Linear Charger in SOP-8 Package
for Single Cell Lithium-Ion Batteries Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly
from USB Port Preset 4.2V Charge Voltage with 1.5%
Accuracy Automatic Recharge Two Charge Status Output Pins C/10 Charge Termination 2.9V Trickle Charge Threshold Soft-Start Limits Inrush Current Available Radiator in PSOP8 Package, the
Radiator need connect GND or impending
Application
reached. SE9018 Other features include current
monit...
Similar Datasheet