DatasheetsPDF.com

LV5684PVC Dataheets PDF



Part Number LV5684PVC
Manufacturers Sanyo
Logo Sanyo
Description Multi-Power Supply
Datasheet LV5684PVC DatasheetLV5684PVC Datasheet (PDF)

Ordering number : ENA2103 LV5684PVC Bi-CMOS LSI For Car Audio Systems Multi-Power Supply IC Overview The LV5684PVC is a power supply IC suitable for USB/CD receiver system for car audio system. This IC integrates 5 systems of regulator output, 2 systems of high side power switch, overcurrent protector, overvoltage protector and overheat protector Supply for VDD and SW33V outputs is low voltage specification, which enables drastic reduction of power dissipation compared to the existing model. .

  LV5684PVC   LV5684PVC



Document
Ordering number : ENA2103 LV5684PVC Bi-CMOS LSI For Car Audio Systems Multi-Power Supply IC Overview The LV5684PVC is a power supply IC suitable for USB/CD receiver system for car audio system. This IC integrates 5 systems of regulator output, 2 systems of high side power switch, overcurrent protector, overvoltage protector and overheat protector Supply for VDD and SW33V outputs is low voltage specification, which enables drastic reduction of power dissipation compared to the existing model. (the package is HZIP15J). Features • Low consumption current: 50μA (typ, only VDD output is in operation) • 5 systems of regulator output VDD for microcontroller: output voltage: 3.3V, maximum output current: 350mA reverse current protection implemented. For system: output voltage: 3.3V, maximum output current: 450mA For audio: output voltage: 5 to 9V (set by external resistors), maximum output current: 250mA For illumination: output voltage: 5 to 12V (set by external resistors), maximum output current: 300mA For CD: output voltage: 5V/8V, maximum output current: 1300mA • 2 lines of high side switch with interlock VCC EXT: Maximum output current: 350mA, voltage difference between input and output: 0.5V ANT: Maximum output current: 300mA, voltage difference between input and output: 0.5V • Supply input V6IN: 6V for VDD, system (SW33V) VCC1: For internal reference voltage, control circuits In case of voltage drop of V6IN, VCC1 supplies to VDD output. VCC2: For AUDIO, illumination, CD, EXT/ANT • Overcurrent protector • Overvoltage protector(OVP): VCC1,VCC2 Typ 23V (All outputs except VDD are turned off) Overvoltage shutdown(OVS): V6IN Typ 23V (All outputs except VDD are turned off) • Overheat protector: Typ 175°C Continued on next page. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performanc.


MIX3007 LV5684PVC LV5684PVD


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)