Document
P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Uni-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation(Fig.2) by 10/1000us
Test Waveform(Fig.4)(Note 1)
PPPM
-Single Die Parts
Peak Pulse Power Dissipation(Fig.2) by
10/1000us Test Waveform(Fig.4)(Note 1)
PPPM
-Stacked Die Parts(Note 4)
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
600
W
800
W
5.0
W
100
A
Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3)
VF
3.5/5.0 V
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RƟJL
Typical Thermal Resistance Junction to Ambient RƟJA
20 °C/W 75 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) = 25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 4. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics.
Description
The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
• 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
• Glass passivated chip junction in DO-15 Package
• Fast response time: typically less than 1.0ps from 0 Volts to BV min
• Excellent clamping capability
• Typical failure mode is short from over-specified voltage or current
• Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR less than 1μA when VBR min>12V
• Compatible with high temperature reflow soldering (260°C/30 s)
• VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%)
• UL Recognized epoxy meeting flammability classification V-0
• Matte tin lead–free plated
• Halogen free and RoHS compliant
• Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01)
Applications
TVS components are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.
Functional Diagram
Additional Infomarion
Cathode
Bi-directional Uni-directional
Anode
Datasheet
Resources
Samples
© 2020 Littelfuse, Inc. Specifications are subject to change without notice.
Revised: JC.10/26/20
TVS Diodes
Axial Leaded – 600W > P6KE series
Electrical Charact.