DatasheetsPDF.com

LMD23088FSR-10 Dataheets PDF



Part Number LMD23088FSR-10
Manufacturers WENRUN
Logo WENRUN
Description DOT MATRIX DISPLAYS
Datasheet LMD23088FSR-10 DatasheetLMD23088FSR-10 Datasheet (PDF)

SPECIFICATIONS FOR DOT MATRIX DISPLAYS 2.3" 8*8 Dot Matrix LMD23088 -10 Series WENRUN OPTOELECTRONIC WENRUN LED Displays LMD23088 Series Features: Emitting dot 5.0mm diameter. High efficiency, low power consumption. Extremely low current. Low development cost. Big viewing angle vertically and horizontally. LMD23088A/B/C/D/E/F -10 Descriptions: The LMD23088 is a 60.2mm (2.3") matrix height 8×8 dot matrix display. These devices are made with white dots and black surface. Application Instrument .

  LMD23088FSR-10   LMD23088FSR-10



Document
SPECIFICATIONS FOR DOT MATRIX DISPLAYS 2.3" 8*8 Dot Matrix LMD23088 -10 Series WENRUN OPTOELECTRONIC WENRUN LED Displays LMD23088 Series Features: Emitting dot 5.0mm diameter. High efficiency, low power consumption. Extremely low current. Low development cost. Big viewing angle vertically and horizontally. LMD23088A/B/C/D/E/F -10 Descriptions: The LMD23088 is a 60.2mm (2.3") matrix height 8×8 dot matrix display. These devices are made with white dots and black surface. Application Instrument panels. Digital read out display. Selection Guide: Part No. Anode Cathode LMD23088B/D/FSR-10 LMD23088A/C/ESR-10 LMD23088B/D/FG-10 LMD23088A/C/EG-10 LMD23088B/D/FY-10 LMD23088A/C/EY-10 LMD23088B/D/FE-10 LMD23088A/C/EE-10 Chip Material GaAlAs Emitting Color Super Red GaP Green GaAsP/GaP Yellow GaAsP/GaP Orange Lens Color White Diffused Prepared date July 2005 http://www.wenrun.com Rev.:3 Page 1 of 6 WENRUN LED Displays LMD23088 Series Absolute Maximum Rating Ta=25 Parameter Symbol Super Red Green Yellow Orange Power Dissipation/ Dot Peak Forward Current / Dot (Duty 1/10@ 1KHz) Continuous Forward Current / Dot Recommend use current / Dot Reverse Voltage / Dot Operating Temperature Range Pd IFP IF IF VR Topr 50 70 20 5~10 5 60 60 70 70 20 20 5~10 5~10 55 -25~ +75 60 70 20 5~10 5 Storage Temperature Range Tstg -30 ~ +85 Solder Temperature Tsol 260 5 Notes 1 This is the limit current. It is not allowed to use when the product work continuously. 2 It is recommended that the product is driven by TTL,CMOS . 3 Soldering time 5 seconds. Electrical Optical Characteristics Ta=25 Unit mW mA mA mA V Parameter Super Red Green Yellow Orange Test Symbol Unit Typ. Max. Typ. Max. Typ. Max. Typ. Max. Condition Luminous Intensity / Dot IV 9.6 -- 4.8 -- 4.8 -- 4.8 -- mcd IF=10mA Forward Voltage / Dot VF 1.85 2.3 2.2 2.5 2.0 2.5 2.0 2.5 V IF=20mA Reverse Current IR -- 50 -- 50 -- 50 -- 50 uA VR=5V / Dot Dominant Wavelength d 645 -- 565 -- 585 -- 630 -- nm IF=20mA Spectral Line Half Width 30 -- 30 -- 30 -- 30 -- nm IF=20mA Prepared date July 2005 http://www.wenrun.com Rev.:3 Page 2 of 6 Package Dimensions: PIN1 7.62*7=53.34 60.2 7.62*7=53.34 60.2 WENRUN LED Displays LMD23088 Series COL1 2 5 34 56 7 8 ROW 1 2 3 4 5 6 7 8 9.2 2.54*7=17.78 0.6 46.4 NOTES • All dimensions are in millimetres (mm), Tolerance is • Specifications are subject to change without notice. 0.25mm unless otherwise noted. Internal Circuit: COL PIN NO ROW PIN NO 19 1 13 2 3 345678 4 10 6 11 15 16 COL PIN NO ROW PIN NO 19 1 13 2 3 345678 4 10 6 11 15 16 2 14 38 2 14 38 4 12 4 12 51 51 67 67 72 72 85 85 LMD23088A Prepared date July 2005 LMD23088B http://www.wenrun.com Rev.:3 Page 3 of 6 Package Dimensions: PIN1 7.62*7=53.34 60.2 7.62*7=53.34 60.2 WENRUN LED Displays LMD23088 Series COL1 2 3 4 5 6 7 8 ROW 1 2 3 4 5 6 7 8 5 9.2 2.54*7=17.78 0.6 45.72 NOTES • All dimensions are in millimetres (mm), Tolerance is • Specificat.


LMD23088DSR-10 LMD23088FSR-10 LMD23088ASR-10


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)