MAX8698C

Confidential MAX8698C, Rev08 MAX8698C PMIC Datasheet for Samsung Application Processor – S5PC100 Rev 08 Page 1/47 DO NOT COPY. DO NOT DISTRIBUTE. : 12/8/2009 Confidential MAX8698C, Rev08 Revision History Rev Date Changes 0 11/13/2008 Preliminary- Initial Release 2 2/5/2009 Power up sequence is revised. In order to control Buck1 and Buck2 by PWREN hardware pin, the I2C control registers of Buck1 and Buck2 must be set to 0 after power up. LDO6 default voltage is changed to 2.6V. LDO5 default voltage is changed to 2.8V. No Load Supply Current 2 is revised 3 2/18/2009 Load Regulation for LDO4/LDO9 changed to 25mV from 40mV 4 3/10/2009 Part number is changed to MAX8698CEWO+T 5 5/7/2009 No load supply current 2 has been updated. 6 5/18/2009 Revised Figure 6 7 10/13/2009 Revised Turn-off technical description in Page 28. In the description, removed ELDO9 from the turn-off sources. 8 12/08/2009 Corrected typos in LDO1 description Author John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee John (Bang Sup) Lee Page 2/47 DO NOT COPY. DO NOT DISTRIBUTE 12/8/2009 Confidential MAX8698C, Rev08 Table of contents General Description................................................................................................................................................. 5 Ordering Information ..................................................................................