HCPL-4504/J454/0454, HCNW4504 High CMR, High Speed Optocouplers
Data Sheet
Lead (Pb) Free RoHS 6 fully compliant
RoHS ...
HCPL-4504/J454/0454, HCNW4504 High CMR, High Speed Optocouplers
Data Sheet
Lead (Pb) Free RoHS 6 fully compliant
RoHS 6 fully compliant options available; -xxxE denotes a lead-free product
Description
The HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.
The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application. These single channel, diode-
transistor optocouplers are available in 8-Pin DIP, SO-8, and Widebody package configurations. An insulating layer between a LED and an integrated photodetector provide electrical insulation between input and output. Separate connections for the photodiode bias and output-
transistor collector increase the speed up to a hundred times that of a conventional photo
transistor coupler by reducing the base collector capacitance.
Functional Diagram
NC 1 ANODE 2 CATHODE 3
NC 4
8 VCC 7 NC 6 VO 5 GND
TRUTH TABLE
LED
ON OFF
VO LOW HIGH
A 0.1 μF bypass capacitor between pins 5 and 8 is recommended.
Schematic
ICC 8 VCC
+ ANODE
2
VF
– CATHODE
3
IF
SHIELD
IO 6 VO
5 GND
Features
Short propagation...