DatasheetsPDF.com

C4666 Dataheets PDF



Part Number C4666
Manufacturers Toshiba
Logo Toshiba
Description 2SC4666
Datasheet C4666 DatasheetC4666 Datasheet (PDF)

2SC4666 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC4666 Audio Frequency Amplifier Applications Switching Applications • High hFE: hFE = 600~3600 • High voltage: VCEO = 50 V • High collector current: IC = 150 mA (max) • Small package Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symb.

  C4666   C4666


Document
2SC4666 TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC4666 Audio Frequency Amplifier Applications Switching Applications • High hFE: hFE = 600~3600 • High voltage: VCEO = 50 V • High collector current: IC = 150 mA (max) • Small package Unit: mm Absolute Maximum Ratings (Ta = 25°C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range Symbol VCBO VCEO VEBO IC IB PC Tj Tstg Rating 50 50 5 150 30 100 125 −55~125 Unit V V V mA mA mW °C °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in JEDEC ― temperature, etc.) may cause this product to decrease in the JEITA SC-70 reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the TOSHIBA 2-2E1A absolute maximum ratings. Please design the appropriate reliability upon reviewing the Weight: 0.006 g (typ.) Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical Characteristics (Ta = 25°C) Characteristics Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Transition frequency Collector output capacitance Noise figure Symbol Test Condition ICBO VCB = 50 V, IE = 0 IEBO VEB = 5 V, IC = 0 hFE (Note) VCE = 6 V, IC = 2 mA VCE (sat) fT Cob NF (1) IC = 100 mA, IB = 10 mA VCE = 10 V, IC = 10 mA VCB = 10 V, IE = 0, f = 1 MHz VCE = 6 V, IC = 0.1 mA, f = 100 Hz, Rg = 10 kΩ NF (2) VCE = 6 V, IC = 0.1 mA, f = 1 kHz, Rg = 10 kΩ Note: hFE classification A: 600~1800, B: 1200~3600 Marking Min Typ. Max Unit ⎯ ⎯ 0.1 μA ⎯ ⎯ 0.1 μA 600 ⎯ 3600 ⎯ 0.12 0.25 V 100 250 ⎯ MHz ⎯ 3.5 ⎯ pF ⎯ 0.5 ⎯ dB ⎯ 0.3 ⎯ 1 2007-11-01 2SC4666 2 2007-11-01 2SC4666 3 2007-11-01 2SC4666 RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-r.


A1787 C4666 C4667


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)