SUBMINIATURE SOLID STATE LAMP
Features
z Black case enhances contrast. z Vibration and shock resistant. z 5V internal resistor. z Housing UL rating:94...
Description
Features
z Black case enhances contrast. z Vibration and shock resistant. z 5V internal resistor. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant.
Package Dimensions
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520EJ/YD5V
Yellow
Description
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD1633 APPROVED: WYNEC
REV NO: V.8 CHECKED: Allen Liu
DATE: MAY/21/2011 DRAWN: Y.H.Wu
PAGE: 1 OF 5 ERP: 1102000029
Selection Guide
Part No.
Dice
Lens Type
AM2520EJ/YD5V
Yellow (GaAsP/GaP)
Yellow Diffused
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%.
Iv (mcd) [2] V= 5V
Min. Typ.
1.2 5
Viewing Angle [1]
2θ1/2
40°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Yellow
λD [1]
Dominant Wavelength
Yellow
Δλ1/2
Spectral Line Half-width
Yellow
IF Forward Current
Yellow
IR Reverse Current
Yellow
Note: 1.Wavelength: +/-1nm.
Typ. 590 588 35 13
Max.
17.5 10
Units nm nm nm mA uA
Test Condition...
Similar Datasheet