Battery Backup System Manager
LTC4110
Battery Backup System Manager
FEATURES
n Complete Backup Battery Manager for Li-Ion/ Polymer, Lead Acid, NiMH/N...
Description
LTC4110
Battery Backup System Manager
FEATURES
n Complete Backup Battery Manager for Li-Ion/ Polymer, Lead Acid, NiMH/NiCd Batteries and Super Capacitors
n Charge and Discharge Battery with Voltages Above and Below the Input Supply Voltage
n “No Heat” Battery Calibration Discharge Using System Load
n Automatic Battery Backup with Input Supply Removal Using PowerPath™ Control
n Standalone for Li-Ion/Polymer, SLA, and Supercaps n Optional SMBus/I2C Support Allows Battery
Capacity Calibration Operation with Host n Over- and Under-Battery Voltage Protection n Adjustable Battery Float Voltage n Precision Charge Voltage ±0.5% n Programmable Charge/Calibration Current Up to
3A with ±3% Accuracy n Optional Temperature Qualified Charging n Wide Backup Battery Supply Range: 2.7V to 19V n Wide Input Supply Range: 4.5V to 19V n 38-Lead (5mm × 7mm) QFN Package
APPLICATIONS
n Backup Battery Systems n Server Memory Backup n Medical Equipment n High Reliability Systems
DESCRIPTION
The LTC®4110 is a complete single chip, high efficiency, flyback battery charge and discharge manager with automatic switchover between the input supply and the backup battery or super capacitor. The IC provides four modes of operation: battery backup, battery charge, battery calibration and shutdown. Battery backup and battery charge are automatic standalone modes, while the optional calibration mode requires a CPU host to communicate over an SMBus. During calibration the flyback charger is used in reverse to discha...
Similar Datasheet