JM20329

JMicron/JM20329 JM20329 Hi-Speed USB to SATA Bridge Datasheet Rev. 1.0 Version 1.0 © JMicron 2007. All rights reserved. Page 1 May 2007 Copying prohibited. Revision History JMicron/JM20329 Version 0.8 0.9 1.0 Date Revision Description 2007/3/20 Initialization of this document for JM20329. 2007/4/16 1. Modify pin out description 2. Remove the description about Serial Flash and Fingerprint recognition. 3. Modify the EEPROM configuration description 2007/5/3 1. Add pin description in USB suspend mode. 2. Remove the typing error of pin17 in SATA power pin © Copyright JMicron Technology, 2007. All Rights Reserved. Printed in Taiwan 2007 JMicron and the JMicron Logo are trademarks of JMicron Technology Corporation in Taiwan and/or other countries. Other company, product and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use implantation or other life supports application where malfunction may result in injury or death to persons. The information contained in this document does not affect or change JMicron’s product specification or warranties. Nothing in this document shall operate as an express or implied license or environments, and is presented as an illustration. The results obtained in other operating environments may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIEDE ON AN “AS IS” BASIS. In no event ...