1.27W MONO CLASS AB AUDIO POWER AMPLIFIERS
AiT Semiconductor Inc.
www.ait-ic.com
A2210
AUDIO POWER AMPLIFIERS 1.27W MONO CLASS AB
DESCRIPTION
The A2210 is a Clas...
Description
AiT Semiconductor Inc.
www.ait-ic.com
A2210
AUDIO POWER AMPLIFIERS 1.27W MONO CLASS AB
DESCRIPTION
The A2210 is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.2W of continuous average power to an 8Ω BTL load with less than 1% distortion (THD+N) from a 5V DC power supply.
The A2210 was designed specifically to provide high quality output power with a minimal amount of external components. It does not require output coupling capacitors or bootstrap capacitors. And with ultra low shutdown current, the A2210 is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. With special pop-click eliminating circuit, the A2210 provides perfect pop-click characteristic during turn-on and turn-off transitions.
The A2210 is unity-gain stable and can be configured by external gain-setting resistors.
The A2210 is available in MSOP8 package.
ORDERING INFORMATION
Package Type
Part Number
MSOP8
MS8
A2210MS8R A2210MS8VR
Note
R: Tape & Reel V: Green Package
AiT provides all Pb free products
Suffix “ V “ means Green Package
FEATURES
PSRR @fIN = 217Hz, VDD = 5V 62dB(typ.) Power Output @VDD = 5V&1% THD RL = 8Ω
1.27W(typ.) Power Output @VDD =3V&1% THD RL = 8Ω
400mW(typ.) Power Output @VDD = 5V&1% THD RL = 4Ω
2W(typ.) Shutdown Current: 0.1μA(typ.) 2.2V ~ 5.5V operation Improved circuitry eliminates pop-click noise
during tur...
Similar Datasheet