2-Line Common Mode Filter and Low Capacitance ESD Protection
EClamp8052P
2-Line Common Mode Filter and Low Capacitance ESD Protection
PROTECTION PRODUCTS - EMIClamp®
PRELIMINARY
...
Description
EClamp8052P
2-Line Common Mode Filter and Low Capacitance ESD Protection
PROTECTION PRODUCTS - EMIClamp®
PRELIMINARY
Description
Features
EClamp®8052P integrates common mode filtering with low capacitance ESD protection and is designed specifically for MIPI, MHL, and HDMI interfaces. Each device provides filtering and ESD protection for one high-speed differential pair.
EClamp8052P is an easily implemented solution for replacing discrete common mode chokes and ESD protection devices in a single package. These devices utilize silicon avalanche technology for superior ESD and TLP clamping performance. They feature high maximum ESD withstand voltage of +/- 25kV contact, +/-30kV air discharge per IEC 61000-4-2. The integrated common-mode choke has a typical differential mode cutoff frequency >3GHZ and typical common mode suppression of 10dB at 500MHz and 15dB from 1GHz to 2.8GHz. Each channel series resistance is 1.8 Ohms maximum.
EClamp8052P is in a 7-pin SGP1917N5 package, measuring 1.9 x 1.7mm with a nominal height of 0.55mm. The leads have a nominal pin-to-pin pitch of 0.50mm. Flow- through package design simplifies PCB layout and maintains signal integrity on high-speed lines.
ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ±30kV (air), ±25kV (contact) IEC 61000-4-5 (Lightning) 6A (8/20μs) IEC 61000-4-4 (EFT) 40A (5/50ns)
Package design optimized for high speed lines ESD protection and common mode filtering for two
high-speed lines High differen...
Similar Datasheet