INFRARED RECEIVER MODULE
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BRM-1040
INFRARED RECEIVER MODULE
● Description
1. The BRM-1040 is miniaturi...
Description
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BRM-1040
INFRARED RECEIVER MODULE
● Description
1. The BRM-1040 is miniaturized infrared receivers for remote control and other applications requiring improved ambient light rejection.
2. The separate PIN diode and preamplifier IC are assembled on a single leadframe.
3. The epoxy package contains a special IR filter. 4. This module has excellent performance even in
disturbed ambient light applications and provides protection against uncontrolled output pulses.
●Package Dimensions:
● Features
1. Photo detector and preamplifier in one package . 2. Internal filter for PCM frequency. 3. High immunity against ambient light. 4. Improved shielding against electric field disturbance. 5. 5.0V supply voltage; low power consumption. 6. TTL and CMOS compatibility. 7. Suitable transmission code:NEC code,RC5 code.
● Applications:
1. It can be used for TVs、VTRs、audio equipment air conditioners、 car stereo radio、toys、 home computers and all other equipment requiring remote control.
NOTES:
1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.10mm (0.004’’) unless otherwise specified. 3.Specifications are subject to change without notice.
● BLOCK DIAGRAM
Preamp
Amp
PD ABLC
Limiter
B.P.F
Demodulator
Integrator
Comparator
Vcc Vout
GND
Rev: 2.0 Page: 1of 4
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BRM-1040
Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
Ratings
Unit
Notice
Supply Voltage
Vcc 4.5 ~ 5.5
V
—
Operat...
Similar Datasheet