Document
: 39
SHENZHEN AV-DISPLAY CO.,LTD
Address: No. 39, Jinyuan Road, He’ao Jinyuan industrial zone, Henggang Town, Long Gang District, Shenzhen, China
:(086)0755-88860696 :(086)0755 -26911092 TEL: (086)0755-88860696 FAX: (086)0755-26911092
:Http://www.av-display.com.cn
Http://www.av-display.com.cn
SPECIFICATION FOR
LCM MODULE
MODULE NO.: ABC016002C35-YHY-R-01 DOC. REVISION 00
Customer Approval:
PREPARED BY (RD ENGINEER) PREPARED BY (QA ENGINEER)
CHECKED BY
APPROVED BY
SIGNATURE
DATE Mar-04-2009
DOCUMENT REVISION HISTORY
Version DATE 00 Mar-04-2009
DESCRIPTION
CHANGED BY
CONTENTS
1. Functions & Features 2. Mechanical specifications 3. Block diagram 4. Dimensional Outline 5. Pin description 6. Maximum absolute limit 7. Electrical characteristics 8. Backlight specification 9. Electro-Optical characteristics 10. Control and display instruction 11. Font Characteristic 12. Precaution for using LCD/LCM 13. LCM test criteria
1 1 1 2 3 3 4-6 6 7 8 9 10-11 12-21
1. FUNCTIONS & FEATURES
1.1. Format
: 16x2 characters
1.2. LCD mode
: STN / Positive/Transflective/Y-G
1.3. Viewing direction
: 6 o’clock
1.4. Driving scheme
: 1/16 Duty , 1/5 Bias
1.5. Power supply voltage (VDD) 1.6. LCD driving voltage
: 5.0V : 5.0V(reference voltage)
1.7. Operation temp
: -20~70℃
1.8. Storage temp
: -30~80℃
1.9. Backlight color
: Bottom ,Yellow-Green
1.10 RoHS standard
2. MECHANICAL SPECIFICATIONS
2.1. Module size
: 122.0mm(L)*44.0mm(W)*13.5 mm (H) max
2.2. Viewing area
: 99.0 mm(L)*25.0mm(W)
2.3. Character pitch
: 6.0mm(L)*10.34mm(W)
2.4. Character size
: 4.84mm(L)*9.66mm(W)
2.5. Dot pitch
: 0.98mm(L)*1.16mm(W)
2.6. Dot size
: 0.92mm(L)*1.10mm(W)
2.7. Weight
: Approx.
3. BLOCK DIAGRAM
C
1 PART NO:
PROJECTION MODEL NUM
HY-1602E-207-R
HY-1602E
DO NOT SCALE TH
Figure 1. Block diagram
1
4. DIMENSIONAL OUTLINE
Figure 2. Dimensional outline 2
16 1
REV DESCRIPTION A First issue
DATE SEP-24-2008
A K
PART NO:
ABC016002C35-YHY-R-01
PROJECTION
SCALE:
FIT
SHEET:
1
OF 1
MODULE NUMBER
GENERAL
TOL:
±0.3
APPROVALS
APP: ABC016002C35-YHY-R-01 CHK:
UNIT mm
DATE
DWN: YZHDO NOT SCALE THIS DRAWING.
SEP-24-2008
5. PIN DESCRIPTION
No. 1 2 3 4
5 6
7 8
9~16
Symbol LEDK LEDA VSS VDD
V0 RS
R/W E
DB0~DB7
Function Power supply for Backlight(0V) Power supply for Backlight(Current 160mA,reference voltage +5.0V) Power ground (0V) Power supply for Logic(+5V)
Power supply for LCD drive Register selection (H: Data register , L :Instruction register)
Read/write selection (H: Read , L: Write) Enable signal.
Data Bus line
6. MAXIMUM ABSOLUTE LIMIT
Item Supply Voltage for Logic Supply Voltage for LCD Input Voltage Supply Current for Backlight Reverse Voltage for Backlight Operating Temperature Storage Temperature
Symbol VDD V0 Vin
IF(Ta = 25°C) VR(Ta = 25°C)
Top Tst
MIN -0.3 VDD-10.0 -0.3 -----20 -30
MAX 7.0
VDD+0.3 VDD+0.3
192 4 70 80
Unit V V V mA V ℃
℃
3
7. ELECTRICAL CHARACTERISTICS
7.1 DC characteristics (VDD=4.5V-5.5V,TA=25℃)
7.2 AC characteristics(VDD=4.5V-5.5V,TA=25℃) Write mode (writing data from MPU to SPLC780D1)
4
Read mode (reading data from SPLC780D1 to MPU) 5
Interface mode with LCD driver
8. BACKLIGHT CHARACTERISTICS
LCD Module with Bottom Yellow-Green LED Backlight
ELECTRICAL RATINGS
Ta = 25°C
Item Forward Voltage
Symbol Condition Min Typ Max VF IF=160mA 3.8 4.0 4.2
Unit
V
Reverse Current
IR
VR=4.0V
---
--- 100
uA
Luminous Intensity(Without Lv IF=160mA 78 111 --- cd/m2
LCD)
Peak wave length
IF=160mA 569 572 575
Color
Yellow-Green
Note:
when the temperature exceed 25℃, the approved current decrease rate for Backlight change as
the temperature increase is: -0.36x16mA/℃(below 25℃, the current refer to constant, which
would not change with temperature ).
6
9. ELECTRO-OPTICAL CHARACTERISTICS
( VDD=5.0V, Ta = 25°C )
Item
Symbol Condition Min Typ Max Unit
Ta = -20°C
4.5
4.8
5.1
Operating Voltage
Vop Ta = 25°C 4.0 4.2 4.4
V
Ta = 70°C 3.5 3.8 4.1
Response time
Tr Tf
Ta = 25°C
-----
185 200
-----
ms ms
Contrast
Cr Ta = 25°C --- 4 --- ---
Viewing angle range
θ Ф
Cr≥2
-40 --- +40 deg -40 --- +40 deg
7
10. CONTROL AND DISPLAY INSTRUCTION
8
11. FONT CHARACTERISTIC
9
12. PRECAUTION FOR USING LCD/LCM
After reliability test, recovery time should be 24 hours minimum. Moreover, functions, performance and appearance shall be free from remarkable deterioration within 50,000 hours
(average) under ordinary operating and storage conditions room temperature (20+8°C), normal
humidity (below 65% RH), and in the area not exposed to direct sun light. Using LCM beyond these conditions will shorten the life time.
Precaution for using LCD/LCM
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make any alteration or modification. The followings should be noted.
General Precautions: 1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong pressure onto
the surface of display area.