DatasheetsPDF.com

TPSMB22A Dataheets PDF



Part Number TPSMB22A
Manufacturers Vishay
Logo Vishay
Description Transient Voltage Suppressors
Datasheet TPSMB22A DatasheetTPSMB22A Datasheet (PDF)

www.vishay.com TPSMB6.8A thru TPSMB43A Vishay General Semiconductor Surface-Mount PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions SMB (DO-214AA) Cathode Anode LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V VWM PPPM 5.8 V to 36.8 V 600 W IFSM 75 A TJ max. 185 °C Polarity Unidirectional Package SMB (DO-214AA) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transie.

  TPSMB22A   TPSMB22A



Document
www.vishay.com TPSMB6.8A thru TPSMB43A Vishay General Semiconductor Surface-Mount PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions SMB (DO-214AA) Cathode Anode LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V VWM PPPM 5.8 V to 36.8 V 600 W IFSM 75 A TJ max. 185 °C Polarity Unidirectional Package SMB (DO-214AA) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology Available • TJ = 185 °C capability suitable for high reliability and automotive requirement • Available in unidirectional polarity only • 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Available • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: SMB (DO-214AA) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL VALUE Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2) Peak pulse current with a 10/1000 μs waveform (fig. 3) (1) Peak forward surge current 8.3 ms single half sine-wave (2)(3) PPPM IPPM IFSM 600 See table next page 75 Maximum instantaneous forward voltage at 50 A (2)(3) VF 3.5 Operating junction and storage temperature range TJ, TSTG -65 to +185 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads at each terminal (3) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum UNIT W A A V °C Revision: 23-Jan-2024 1 Document Number: 88406 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com TPSMB6.8A thru TPSMB43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless othe.


TPSMB22 TPSMB22A TPSMB24


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)