Quad EIA-485 Line Receivers
Quad EIA-485 Line Receivers
The Motorola SN75173/175 are monolithic quad differential line receivers with three–state ou...
Description
Quad EIA-485 Line Receivers
The Motorola SN75173/175 are monolithic quad differential line receivers with three–state outputs. They are designed specifically to meet the requirements of EIA–485, EIA–422A/23A Standards and CCITT recommendations.
The devices are optimized for balanced multipoint bus transmission at rates up to 10 megabits per second. They also feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common mode input voltage range of – 12 V to 12 V. The SN75173/175 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers.
Meets EIA Standards EIA–422A and EIA–423A, EIA–485 Meets CCITT Recommendations V.10, V.11, X.26, and X.27 Designed for Multipoint Transmission on Long Bus Lines in Noisy
Environments
3–State Outputs Common–Mode Input Voltage Range . . . –12 V to 12 V Input Sensitivity . . . ± 200 mV Input Hysteresis . . . 50 mV Typ High Input Impedance . . . 1 EIA–485 Unit Load Operates from Single 5.0 V Supply Lower Power Requirements Plug–In Replacement for MC3486 (SN75175)
AM26LS32 (SN75173)
Order this document by SN75173/D
SN75173 SN75175
QUAD EIA–485 LINE RECEIVERS WITH THREE–STATE OUTPUTS
SEMICONDUCTOR TECHNICAL DATA
D SUFFIX PLASTIC PACKAGE
CASE 751B (SO–16)
N SUFFIX PLASTIC PACKAGE
CASE 648
SN75173
PIN CONNECTIONS
SN75175
Inputs A
1– 2+
Output A
3–State Control
Output C
3 4 5
Inputs C
6+ 7–
Gnd 8
16 VCC
– 15 +...
Similar Datasheet