Low Power Optical Mouse Sensor
ADNS-5095 Low Power Optical Mouse Sensor
Data Sheet
Description
The Avago Technologies ADNS-5095 is a low power, small ...
Description
ADNS-5095 Low Power Optical Mouse Sensor
Data Sheet
Description
The Avago Technologies ADNS-5095 is a low power, small form factor optical mouse sensor. It has a new low-power architecture and automatic power management modes, making it ideal for battery, power-sensitive applications – such as cordless input devices.
The ADNS-5095 is capable of high-speed motion detection – up to 30ips and 8G. In addition, it has an on-chip oscillator and LED driver to minimize external components.
The ADNS-5095 along with the ADNS-5100-001 trim lens, ADNS-5200 clip and HLMP-EG3E-xxxxx LED form a complete and compact mouse tracking system. There are no moving parts and this translates to high reliability and less maintenance for the end user. In addition, precision optical alignment is not required, facilitating high volume assembly.
The sensor is programmed via registers through a fourwire serial port. It is housed in an 8-pin staggered dual inline package (DIP).
Features
Low Power Architecture Small Form Factor Programmable Periods / ResponseTimes and Downshift
Times from one mode to another for the Power-saving Modes
’Smart’ LED Current Switching depending on surface brightness
High Speed Motion Detection up to 30ips and 8G External Interrupt Output for Motion Detection Internal Oscillator – no clock input needed Selectable Resolution up to 1750cpi Operating Voltage: as low as 2.8V Four wire Serial Port Interface Minimal number of passive components
Applications
O...
Similar Datasheet