OPB755NZ

Reflective Object Sensor OPB750N, OPB750T OPB755NZ, OPB755TZ, OPB755TAZ Features: High contrast ratio (1,000 :1 minimum) Low cost plastic housing PCBoard mount (OPB750N, OPB750T) 12” (305 mm) 26 AWG wires (OPB755NZ, OPB755TZ) Available with no-mounting tabs “N” package Available with two mounting tabs “T” package OPB750 Product Photo Here OPB755TAZ OPB755TZ Description: Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not affecting the high-level light gain. The OPB750N and OPB750T devices have are designed for PCBoard mounting with 0.40” (10 mm) length leads. OPB755NZ, OPB755TZ and OPB755TAZ assemblies are designed for remote mounting. The OPB755NZ and OPB755TZ have 12” (305 mm) UL rated wire, 26 AWG wire leads that terminate into an AMP # 3-640442-5 connector. The OPB755TAZ has 24” (610 mm) UL rated wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while the OPB750N and OPB755NZ have no mounting tabs. Photologic® output versions are available with the OPB760 and OPB770 series. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Ordering Information Part Number LED Peak Reflecti...