MB95210H

FUJITSU MICROELECTRONICS CONTROLLER MANUAL CM26-10120-1E F2MC-8FX 8-BIT MICROCONTROLLER MB95200H/210H Series HARDWARE MANUAL F2MC-8FX 8-BIT MICROCONTROLLER MB95200H/210H Series HARDWARE MANUAL The information for microcontroller supports is shown in the following homepage. Be sure to refer to the "Check Sheet" for the latest cautions on development. “Check Sheet” is seen at the following support page. “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development. http://edevice.fujitsu.com/micom/en-support/ FUJITSU MICROELECTRONICS LIMITED MB95200H/210H Series PREFACE ■ The Purpose and Intended Readership of This Manual Thank you very much for your continued special support for Fujitsu semiconductor products. The MB95200H/210H Series is a line of products developed as general-purpose products in the F2MC8FX family of proprietary 8-bit single-chip microcontrollers applicable as application-specific integrated circuits (ASICs). The MB95200H/210H Series can be used for a wide range of applications from consumer products including portable devices to industrial equipment. Intended for engineers who actually develop products using the MB95200H/210H Series of microcontrollers, this manual describes its functions, features, and operations. You should read through the manual. For details on individual instructions, refer to "F2MC-8FX Programming Manual". Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller. ■ Tr...