AT30TSE752

Atmel AT30TSE752, AT30TSE754, AT30TSE758 9- to 12-bit Selectable, ±0.5°C Accurate Digital Temperature Sensor with Nonvolatile Registers and Serial EEPROM Features DATASHEET See Applicable Errata in Section 16.  Integrated Temperature Sensor + Nonvolatile Registers + Serial EEPROM  2-Wire I2C and SMBus™ compatible serial interface  Supports SMBus Timeout  Supports SMBus Alert and Alert Response Address (ARA)  Selectable addressing allows up to eight devices on the same bus  Single 2.7V - 5.5V supply  100KHz and 400KHz compatibility  Industry standard green (Pb/Halide-free/RoHS compliant) package options  8-lead SOIC (150-mil)  8-lead MSOP (3 x 3mm)  8-pad Ultra Thin DFN (UDFN - 2 x 3 x 0.6mm) Digital Temperature Sensor Features  Measures temperature from -55C to +125C  Highly accurate temperature measurements requiring no external components  ±0.5°C accuracy (typical) over the 0C to +85C range  ±1.0°C accuracy (typical) over the -25C to +105C range  ±2.0°C accuracy (typical) over the -40C to +125C range  Pin and software compatible to industry-standard LM75-type devices  User-configurable resolution  9 to 12 bits (0.5C to 0.0625C)  User-configurable high and low temperature limits  Nonvolatile registers to retain user-configured or pre-defined power-up defaults  Register locking to prevent erroneous misconfiguration  Register lockdown for permanent, non-changeable device configuration  One-shot mode for single temperature measurement while...