VKP-31F42

PCB Relays Single Relays VKP (Open – Sealed) Catalog 1308028-2 Revised 6-2009 VKP to be discontinued by end of 2009 Features – Limiting continuous current 32 A at 85°C – Wide voltage range Typical Applications – ABS control – Blower fans – Car alarm – Cooling fan – Engine control – Fuel pump – Hazard warning signal – Heated front screen – Heated rear screen – Ignition – Lamps front, rear, fog light – Interior lights – Main switch/supply relay – Seat control – Seatbelt pretensioner – Sun roof – Turn signal – Valves – Window lifter – Wiper control Please contact Tyco Electronics for relay application support. Design – ELV compliant – Open: flux tight type – Sealed: washable type Weight – Approx. 19 g (0.67 oz.) open version – Approx. 22 g (0.77 oz.) sealed version Nominal Voltage 12 V or 24 V Terminals PCB terminals, for assembly on printed circuit boards VKP_3d01 Conditions All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23°C ambient temperature, 20 - 50% RH, 998.9 ±33.9 hPa. For general storage and processing recommendations please refer to our Application Notes and especially to Storage in the “Glossary” page 23 or at http://relays.tycoelectronics.com/ appnotes/ Disclaimer All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the relay for your intended pu...