Single and dual output DC/DC Converters
[ 2 YEAR WARRANTY ]
NFC10 SERIES
Single and dual output
• 10 Watts output power • Power density 13.3W/in3 • 2:1 input v...
Description
[ 2 YEAR WARRANTY ]
NFC10 SERIES
Single and dual output
10 Watts output power Power density 13.3W/in3 2:1 input voltage range UL, CSA and VDE safety approvals (48V input units) Overvoltage protection Extended operating temperature range Fixed switching frequency
The NFC10 offers 10 Watts of output power from a 2 x 1 x 0.375 inch package without derating to 71°C. A range of 15 models with 2:1 wide input voltages of 9–18, 18–36 and 36–72VDC and single and dual outputs are offered. Features of the NFC10 series include fixed frequency operation, high MTBF, overvoltage protection and tight load regulation. All of the models have been designed to meet EN60950 (Vin <60VDC) safety requirements. Typical applications are telecommunications, industrial automation and distributed power.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
OUTPUT SPECIFICATIONS
Line regulation
LL to HL, single output LL to HL, dual output
±1.0% ±1.0%
Load regulation
FL to 10% FL, singles FL to 10% FL, duals
±1.0% typ. ±2.0% typ.
Total error band
Singles Duals
±3.0% max. ±5.0% max.
Ripple and noise
5Hz to 20MHz
100mV pk-pk, max. 20mV rms max.
Transient response
25% step
±2.0% max. dev., 500µs recovery
Temperature coefficient
±0.02%/°C, max.
Overvoltage protection Single output
clamp
Dual output
125% Vout 125% Vout total
Short circuit protection (See Note 9)
Continuous automatic recovery
INPUT SPECIFICATIONS
Input ...
Similar Datasheet