Miniature Ambient Light Photo Sensor
APDS-9303 Miniature Ambient Light Photo Sensor with Digital (SMBus) Output
Data Sheet
Description
The APDS-9303 is a lo...
Description
APDS-9303 Miniature Ambient Light Photo Sensor with Digital (SMBus) Output
Data Sheet
Description
The APDS-9303 is a low-voltage Digital Ambient Light Photo Sensor that converts light intensity to digital signal output capable of direct SMBus interface. Each device consists of one broadband photodiode (visible plus infrared) and one infrared photodiode. Two integrating ADCs convert the photodiode currents to a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human-eye response.
Application Support Information
The Application Engineering Group is available to assist you with the application design associated with APDS-9303 ambient light photo sensor module. You can contact them through your local sales representatives for additional details.
Features
Approximate the human-eye response
Precise Illuminance measurement under diverse lighting conditions
Programmable Interrupt Function with User-Defined Upper and Lower Threshold Settings
16-Bit Digital Output with SMBus at 100 kHz
Programmable Analog Gain and Integration Time
Miniature ChipLED Package – Height – 0.55mm – Length – 2.60mm – Width – 2.20mm
50/60-Hz Lighting Ripple Rejection
Low Active Power (0.6 mW Typical) with Power Down Mode
RoHS Compliant
Applications
Detection of ambient light to control display ...
Similar Datasheet