Automotive Sensor Signal Conditioner
The Analog Mixed Signal Company
ZMD31035
Automotive Sensor Signal Conditioner PRELIMINARY
Features
• Digital compensati...
Description
The Analog Mixed Signal Company
ZMD31035
Automotive Sensor Signal Conditioner PRELIMINARY
Features
Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity
Adjustable to nearly all piezo-resistive bridge sensors types Digital one-shot calibration: quick and precise Selectable temperature compensation reference:
internal or external diode Output options: analog voltage (0 to 5V) or one-wire-interface
(LIN compatible protocol) Digital sensor calibration via one-wire-interface Sampling rate typically 125Hz High voltage protection Reverse polarity and short circuit protection Operation temperature –40 to +125°C Supply voltage 4.5 to 5.5V
Application Circuit
TEMP. SENSING DIODE
BRIDGE SENSOR
VDDB VTN VBN VSSB VBP AOUT VSSE
ZMD31035
VSSA VSSA VDDA DI CLK VDD VDDE VSS
100n
100n 100n
GND
OUT OWI
15n
VSUPPLY 4.5...5.5V
Benefits
No external trimming components required PC-controlled configuration and calibration
via one-wire interface – simple, low cost High accuracy (±0.1% FSO @ -25 to 85°C;
±0.25% FSO @ -40 to 125°C)
Brief Description
The ZMD31035 is a CMOS integrated circuit for highlyaccurate amplification and sensor-specific correction of bridge sensor signals. Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity is accomplished via a 16-bit RISC micro-controller running a correction algorithm with calibration coefficients stored in a non-volatile EEPROM. The ZMD31035 is adjust...
Similar Datasheet