Programmable angle sensor
KMA199
Programmable angle sensor
Rev. 2 — 7 December 2011
Product data sheet
1. Product profile
1.1 General descripti...
Description
KMA199
Programmable angle sensor
Rev. 2 — 7 December 2011
Product data sheet
1. Product profile
1.1 General description
The KMA199 is a magnetic angle sensor system. The MagnetoResistive (MR) sensor bridges and the mixed signal Integrated Circuit (IC) are integrated into a single package.
This angular measurement system KMA199 is pre-programmed, pre-calibrated and therefore, ready to use.
The KMA199 allows user specific adjustments of angular range, zero angle and clamping voltages. The settings are stored permanently in an Electrically Erasable Programmable Read-Only Memory (EEPROM).
1.2 Features and benefits
High precision sensor for magnetic
Ratiometric analog output voltage
angular measurement
Automotive qualified in accordance with Single package sensor system
AEC-Q100
Programmable user adjustments,
High temperature range up to 160 C
including zero angle and angular range
Fail-safe EEPROM
Built-in transient protection
Independent from the magnetic field Programming via One-Wire Interface
strength above 35 kA/m
(OWI)
User-programmable 32-bit identifier
Magnet-loss and power-loss detection
Ready to use
Factory calibrated
NXP Semiconductors
KMA199
Programmable angle sensor
2. Pinning information
Table 1. Pinning
Pin Symbol
1
VDD
2 GND
3 OUT/DATA
Description supply voltage ground analog output or data interface
Simplified outline
3. Ordering information
Table 2. Ordering information
Type number Package
Name
De...
Similar Datasheet