1024-BIT SERIAL ELECTRICALLY ERASABLE PROM
IS24C01-3
IS24C01-3
1,024-BIT SERIAL ELECTRICALLY ERASABLE PROM
ISSIISSI®®
ADVANCE INFORMATION APRIL 1998
FEATURES
• L...
Description
IS24C01-3
IS24C01-3
1,024-BIT SERIAL ELECTRICALLY ERASABLE PROM
ISSIISSI®®
ADVANCE INFORMATION APRIL 1998
FEATURES
Low power CMOS — Active current less than 2 mA — Standby current less than 8 µA
Low voltage operation — 3.0V (Vcc = 2.7V to 5.5V)
Hardware write protection — Write control pin
Internally organized as 128 x 8 Two-wire serial interface
— Bidirectional data transfer protocol 8-Byte page-write mode
— Minimized total write time per byte 100 KHz at 3V; 400 KHz at 5V Automatic word address incrementing
— Sequential register read
Self-timed write cycle — Maximum write cycle time of 10 ms
Endurance: 100K cycles per byte 8-pin PDIP or SOIC packages Filtered inputs for noise suppression
OVERVIEW
The IS24C01-3 is a low cost 1,024-bit serial EEPROM. It
is fabricated using ISSI’s advanced CMOS EEPROM
technology and operates from a single supply.
The IS24C01-3 is internally organized as a 128 x 8 memory bank. The IS24C01-3 features a serial interface and software protocol allowing operation on a simple 2-wire bus. Up to eight IS24C01-3s may be connected to the 2-wire bus by programming the A0, A1, and A2 inputs.
FUNCTIONAL BLOCK DIAGRAM
Vcc 8
SDA 5 SCL 6 WC 7
A2 3 A1 2 A0 1
CONTROL LOGIC
SLAVE ADDRESS REGISTER & COMPARATOR
Load Inc.
WORD ADDRESS COUNTER
X DECODER
HIGH VOLTAGE GENERATOR, TIMING AND
CONTROL
32 x 32 32 MEMORY
CORE
32 Y DECODER
GND 4
nMOS
ACK
Clock
DATA
DI/O REGISTER
This document contains ADVANCE INFORMATION data. ISSI res...
Similar Datasheet