WTE
POWER SEMICONDUCTORS
S3AB – S3MB Pb
3.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE
Features
! Glass Passivated Die Construction
! Ideally Suited for Automatic Assembly ! Low Forward Voltage Drop ! Surge Overload Rating to 100A Peak ! Low Power Loss ! Built-in Strain Relief ! Plastic Case Material has UL Flammability
A
B F
Classification Rating 94V-O
C
HG
E
Mechanical Data
! Case: SMB/DO-214AA, Molded Plastic ! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026 ! Polarity: Cathode Band or Cathode Notch ! Marking: Type Number ! Weight: 0.093 grams (approx.) ! Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
SMB/DO-214AA
Dim Min Max
A 3.30 3.94
B 4.06 4.70
C 1.91 2.11
D
0.152
0.305
E 5.08 5.59
F 2.13 2.44
G
0.051
0.203
H 0.76 1.27
All Dimensions in mm
D
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current @TL = 75°C
Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method)
Forward Voltage
@IF = 3.0A
Peak Reverse Current At Rated DC Blocking Voltage
@TA = 25°C @TA = 125°C
Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
Symbol S3AB S3BB S3DB S3GB S3JB S3KB S3MB Unit
VRRM VRWM
VR
50 100 200 400 600 800 1000 V
VR(RMS) 35 70 140 280 420 560 700 V
IO 3.0 A
IFSM
100 A
VFM
IRM
trr Cj RJL Tj, TSTG
1.20 5.0 250 2.5 60 13 -65 to +150
V
µA
µS pF °C/W °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area.
S3AB – S3MB
1 of 4
© 2006 Won-Top Electronics
IF, INSTANTANEOUS FORWARD CURRENT (A)
IAV, AVERAGE FORWARD CURRENT (A)
3.0
Resistive or
10
Inductive Load
2.5
2.0 1.0 1.5
1.0 0.1
0.5
0 25
50
75 100 125 150
TL, LEAD TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve
0.01 0
0.4 0.8 1.0 1.4 1.8
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
IR, INSTANTANEOUS REVERSE CURRENT (µA)
120 100
80
Single Half-Sine-Wave JEDEC Method
1000 100
10
Tj = 125°C
60 1.0
40 Tj = 25°C 0.1
20
0 1 10 100
NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve
0.01 0
20 40
60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
S3AB – S3MB
2 of 4
© 2006 Won-Top Electronics
MARKING INFORMATION
WTE S3xB
Cathode WTE S3xB x
= Polarity Band = Manufacturer’s Logo = Device Number = A, B, D, G, J, K or M
RECOMMENDED FOOTPRINT
0.050 MIN (1.27 MIN)
0.106 MAX (2.65 MAX)
0.082 MIN (2.10 MIN)
inches(mm)
PACKAGING INFORMATION TAPE & REEL
330mm
Product ID Label
Direction of Unreeling
8mm
12mm
12mm
4mm
1.6mm
Reel Diameter (mm)
330
Quantity (PCS)
3,000
Inner Box Size L x W x H (mm)
340 x 337 x 45
Quantity (PCS)
6,000
Carton Size L x W x H (mm)
370 x 370 x 420
Quantity (PCS)
48,000
Approx. Gross Weight (KG)
14.0
Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2.
S3AB – S3MB
3 of 4
© 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. S3AB-T3 S3BB-T3 S3DB-T3 S3GB-T3 S3JB-T3 S3KB-T3 S3MB-T3
Package Type SMB SMB SMB SMB SMB SMB SMB
Shipping Quantity 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel
1. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, S3AB-T3-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email:
[email protected] Internet: http://www.wontop.com
We power your everyday.
S3AB – S3MB
4 of 4
© 2006 Won-Top Electronics
.