SINGLE-PHASE BRIDGE RECTIFIER
MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
4.0 Ampere
FEATURES Low cost High forwa...
Description
MOSPEC
SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
4.0 Ampere
FEATURES Low cost High forward surge current capability Ideal for printed circuit board High temperature soldering guaranteed: 260oc/10 second at 5 lbs. (2.3kg) tension
MECHANICAL DATA Case: Transfer molded plastic
Epoxy: UL94V-O rate flame retardant
Terminals Lead Solderable Per MIL-STD-202E method 208C Polarity As Marking on Body
Mounting Position: Any
Weight 0.22 ounce, 6.21 gram
RS401 THRU RS407
MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS
* Rating at 25 ambient temperature unless otherwise specified
* Single phase, half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 %
Characteristic
Symbol RS401 RS402 RS403 RS404 RS405 RS406 RS407
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage
VRRM VRWM 50 100 200 400 600 800 1000
VR
Unit V
RMS Reverse Voltage
VR(RMS)
Average Forward Rectified TC=50 (Note 2)
Output Current , at
TA=50 (Note 3)
Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load ( JEDEC Method)
Forward Voltage (per element) ( IF =4.0 Amp)
IO(AV) IFSM VFM
35
70 140 280 420 560 700 4.0 3.0
150
1.0
V A A V
Maximum DC reverse current at rated DC blocking voltage per element
TA TA
= =
25 100
Rating for Fusing( t<8.3 ms)
IR I2t
Typical Junction Capacitance per element (Note1) CJ
Typical Thermal Resistance (note 3) Operating and Storage Temperature Range
...
Similar Datasheet