Document
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc.
Prepared Date:
8/30/2004
Final Specification
Quanta Display Inc. SPECIFICATION
Doc No. QD15TL0302-00 Doc. REV.: 00
Issue Date: 9/14/2004 Page: 24 pages (Include cover page)
Specification for TFT LCD Module
Model No.
QD15TL03 Rev.:02
Ƒ Approval By
Sony Corporation
Quanta Computer Inc.
Quanta Display Inc.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc.
These specification sheets are the proprietary product of Quanta Display Inc. (”QDI”) and include materials protected under copyright of QDI. Do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of QDI.
The device listed in these technical literature sheets was designed and manufactured for use in OA equipment.
In case of using the device for applications such as control and safety equipment for transportation (aircraft, trains, automobiles, etc.), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications, telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for life support.
QDI assumes no responsibility for any damage resulting from the use of the device, which does not comply with the instructions, and the precautions specified in these technical literature sheets.
Contact and consult with a QDI sales representative for any questions about this device.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
Quanta Display Inc.
www.panelook.com
REV. Date 0 9/14/2004
ECN NO.
Revision History Change Content
N/A Specification Initiation
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc.
1. Application This specification applies to a color TFT-LCD module, QD15TL03 rev.02.
2. Overview This module is a color active matrix LCD module incorporating amorphous silicon TFT
(Thin Film Transistor). It is composed of a color TFT-LCD panel; driver ICs, control circuit and power supply circuit and a backlight unit. Graphics and texts can be displayed on a 1280 3
800 dots panel with 262,144 colors by using LVDS (Low Voltage Differential Signaling) to interface and supplying +3.3V DC supply voltage for TFT-LCD panel driving and supply voltage for backlight. The TFT-LCD panel used for this module has very high aperture ratio. A low-reflection and higher-color-saturation type color filter is also used for this panel. Therefore, high-brightness and high-contrast image, which is suitable for the multimedia use, can be obtained by using this module.
Optimum viewing direction is 6 o'clock.
[Features] 1) High aperture panel; high-brightness or low power consumption. 2) Brilliant and high contrast image. 3) Small footprint and thin shape. 4) Light weight. 5) Wide Screen 15.4” WXGA 6) Lead free ( Pb contain is less than 1000ppm ) compliant 7) RoHS compliant
3. General Specifications
Parameter
Specifications
Unit
Display size
390.1 (15.4”) Diagonal
mm
Active area
331.2 207.0
mm
Pixel format
1280 (H) 800 (V)
Pixel
(1 pixel = R+G+B dots)
Pixel pitch
0.2588(H) 0.2588 (V)
mm
Pixel configuration
R, G, B vertical stripe
Display mode
Normally white
Unit outline dimensions (typ.)*1, 2 344.0(W) 222.0 (H) 6.35(T)max.
mm
Mass
585 max.
g
Surface treatment
Haze 0; Hardness 2H; Low reflection (~2.5%)
*1.Note: excluding backlight cables. Outline dimensions are shown in this specification.
*2.Note: Please refer to outline drawing, the thickness spec. of screw nearby lamp side are
6.6 and 6.8mm max.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Quanta Display Inc.
4. Input Terminals
4-1. TFT-LCD panel driving CN1 (1 channel, LVDS signals – NSC/Ti standard and +3.3V DC power supply) Using connector: FI-XB30Sx-HFxx/FI-X30Sx-HFxx/equivalent (JAE)
Interface Cable Pin Assignments
PIN NO . SYMBOL
FUNCTION
1 VSS
Ground
2 VDD
Power Supply, 3.3 V (typical)
3 VDD
Power Supply, 3.3 V (typical)
4
V EEDID
DDC 3.3V power
5 NC
Reserved for supplier test point
6
Clk EEDID
DDC Clock
7 DATA EEDID DDC Data
8 Rin0-
- LVDS differential data input (R0-R5, G0) (odd pixels)
9 Rin0+
+ LVDS differential data input (R0-R5, G0) (odd pixels)
1.