Product Specification
LP150U1 Liquid Crystal Display
1. General Description
The LP150U1-A2 is a Color Active Matrix Li...
Product Specification
LP150U1 Liquid Crystal Display
1. General Description
The LP150U1-A2 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) back light system. The matrix employs a-Si Thin Film
Transistor as the active element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 15.0 inch diagonally measured active display area with UXGA resolution(1200 vertical by 1600 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of 262,144 colors.
The LP150U1-A2 has been designed to apply the interface method that enables low power, high speed low EMI. Flat Link must be used as a LVDS(Low Voltage Differential Signaling) chip.
The LP150U1-A2 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the LP150U1-A2 characteristics provide an excellent flat panel display for office automation products such as Notebook PC.
LVDS
pair #1
CN1 (30pin)
LVDS
pair #2
ASIC
RGB/Control
S1
G1
Column Driver Circuit
S1600
Low Driver circuiit
LVDS #1
RGB(1’st)
1’st _Clk
2’nd_Clk
LVDS RGB(2’nd) #2
Timing
Control Block
TFT-LCD Panel
(1600 x RGB x 1200 pixels)
...