0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8
Features
․High reliability ․Small double-end package ․Peak wavelen...
0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8
Features
․High reliability ․Small double-end package ․Peak wavelength p=850nm ․Package in 8mm tape on 7” diameter reel ․Low forward voltage ․Pb free ․The product itself will remain within RoHS compliant version.
Descriptions
․HIR19-21C/L11/TR8 is an infrared emitting diode in
miniature SMD package which is molded in a water clear plastic with flat top view lens. ․The device is spectrally matched with silicon
photodiode and photo
transistor.
Applications
․PCB mounted infrared sensor ․Infrared remote control units with high power requirement ․Smoke detector ․Infrared applied system
Device Selection Guide
Part Category
Chip Material
Lens Color
HIR
GaAlAs
Water clear
1 Copyright © 2013, Everlight All Rights Reserved. Release Date : 5/28/2013. Issue No: DIR-0000956. Rev:4
www.everlight.com
Revision : 4 LifecyclePhase:
Release Date:2013-06-10 17:28:46.0 Expired Period: Forever
Data Sheet 0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8
Package Dimensions
Notes: 1.All dimensions are in millimeters
2.Tolerances unless dimensions 0.1mm
Absolute Maximum Ratings (Ta=25 )
Parameter
Symbol
Rating
Continuous Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature *1 Power Dissipation at(or below) 25 Free Air Temperature
IF VR Topr Tstg Tsol
Pd
65 5 -25 ~ +85 -40 ~ +85 260
130
Notes: *1:Soldering time 5 seconds.
Units mA V
mW
2 Copyright © 2013, Everlight All Rights Reserv...