Document
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CUSTOMER APPROVAL SPECIFICATION
(● ) Preliminary Specification ( ) Final Specification
Title PDP60C4#### (60”WXGA PDP MODULE)
Buyer Name Model Name
PART No.
KINGYOO. Co. LTD
Supplier Model Name
PART No.
LG Electronics Inc. PDP60C4####
Signature / Date
Signature / Date
Approved by
Approved by
Please return 1 copy for our confirmation with your signature
PDP CM Team, TV Division, LG Electronics Inc.
Revision No. 1.0
Confidential
21 / May/ 2012
Page 1/44
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
Record of Revisions
Revison No.
Ver. 1.0
Effective Date
2012. 05. 21
- Establishment
Comments
Revision No. 1.0
Confidential
21 / May/ 2012
Page 2/44
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CONTENTS
0. WARNINGS AND CAUTIONS
Warning Caution
1. GENERAL DESCRIPTION
Description Features Applications Electrical Interface of Plasma Display General Specifications Block Diagram Conditions of Acceptability
2. ELECTRICAL SPECIFICATIONS
Absolute Power Specifications Input Power Specifications Power Supply Sequence LVDS Signal and LVDS Receiver Input Signal Timing Diagram Input Signal Timing Specification I2C Timing Specification ASIC I2C Signal & Register Description FPGAC I2C Signal & Register Description
3. ELECTRO OPTICAL SPECIFICATIONS
Electro Optical characteristic Specifications Cell Defect Specifications Filter Defect Specifications
4. MECHANICAL & ENVIRONMENTAL SPECIFICATIONS
Mechanical Characteristic Specifications Vibration and Drop Specifications Scratch and Dent Specifications Recommended Environmental Conditions
5. IMAGE STICKING CHARACTERISTICS
Image Sticking Secular change in brightness Warranty Cause of deterioration in brightness Practical value for Image sticking Proposed measures taken to relieve image sticking
6. STAIN OF EXHAUST HOLE 7. OUTLINE DRAWING
Front View Rear View
8. CONNECTORS and CONNECTIONS
9. LABEL
10. PACKING
Revision No. 1.0
Confidential
21 / May/ 2012
4
4 5
8
8 8 8 9 9 10 11
12
12 13 14 15 18 19 21 23 27
31
31 33 34
35
35 35 35 35
36
36 36 36 36 36 37
37 38
38 39
40
41
43
Page 3/44
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
0. Warnings and Cautions
WARNING indicates hazards that may lead to death or injury if ignored. CAUTION indicates hazards that may lead to injury or damage to property if ignored.
WARNING
1) This product uses a high voltage (550 V max.). Do not touch the circuitry of this product with your hands when power is supplied to the product or immediately after turning off the power. Be sure to confirm that the voltage is dropped to a sufficiently low level.
2) Do not supply a voltage higher than that specified to this product. This may damage the product and may cause a fire.
3) Do not use this product in locations where the humidity is extremely high, where it may be splashed with water, or where flammable materials surround it. Do not install or use the product in a location that does no satisfy the specified environmental conditions. This may damage the product and may cause a fire.
4) If a foreign substance (such as water, metal, or liquid) gets inside the product, immediately turn off the power. Continuing to use the products it may cause fire or electric shock.
5) If the product emits smoke, an abnormal smell, or makes an abnormal sound, immediately turn off the power. If noting is displayed or if the display goes out during use, immediately turn off the power. Continuing to use the product as it is may cause fire or electric shock.
6) Do not disconnect or connect the connector while power to the product is on. It takes some time for the voltage to drop to a sufficiently low level after the power has been turned off. Confirm that the voltage has dropped to a safe level before disconnecting or connecting the connector. Otherwise, this may cause fire, electric shock, or malfunction.
7) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause electric shock. 8) Do not damage or modify the power cable. It may cause fire or electric shock. 9) If the power cable is damaged, or if the connector is loose, do not use the product; otherwise, this can lead to fire
or electric shock. 10) If the power connector or the connector of the power cable becomes dirty or dusty, wipe it with a dry cloth.
Otherwise, this can lead to fire. 11) This product is designed only for a public display, not for consumer display. 12) Install a protection layer for the viewer safety and the fragile glass product, if it is possible that viewers touch
this product directly.
Revision No. 1.0
Confidential
21 / May/ 2012
Page 4/44
PDP Division, LG Electronics Inc.
Product Specification of PDP Module
CAUTION
General
1) Do not place this product in a location that is subject to heavy vibration, or on an unstable surface such as .