Dual common-mode rejection differential line receiver
INTEGRATED CIRCUITS
DATA SHEET
TDA8577 Dual common-mode rejection differential line receiver
Preliminary specification ...
Description
INTEGRATED CIRCUITS
DATA SHEET
TDA8577 Dual common-mode rejection differential line receiver
Preliminary specification File under Integrated Circuits, IC01
September 1995
Philips Semiconductors
Philips Semiconductors
Dual common-mode rejection differential line receiver
Preliminary specification
TDA8577
FEATURES
Excellent common-mode rejection, up to high frequencies
Elimination of source resistance dependency in the common-mode rejection
Few external components High supply voltage ripple rejection Low noise Low distortion All pins protected against electrostatic discharge AC and DC short-circuit safe to ground and VCC Fast DC settling.
GENERAL DESCRIPTION
The TDA8577 is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated. The device is intended to be used to receive line inputs in audio applications that require a high level of common-mode rejection. The device is contained in a 9-pin single in-line package.
QUICK REFERENCE DATA
SYMBOL
VCC ICC Gv SVRR Vno |Zi| CMRR
PARAMETER supply voltage supply current voltage gain supply voltage ripple rejection noise output voltage input impedance common-mode rejection ratio
CONDITIONS VCC = 8.5
Rs = 0 Ω
MIN.
5.0 − −0.5 55 − 100 −
TYP. 8.5 11 0 60 3.7 240 80
MAX.
18 14 +0.5 − 5.0 − −
UNIT
V...
Similar Datasheet