Document
FOR MESSRS:
DATE : May 31st,2012
CUSTOMER’S ACCEPTANCE SPECIFICATIONS
TX43D51VC0CAA
Contents
No. ITEM 1 COVER 2 RECORD OF REVISION 3 GENERAL DATA 4 ABSOLUTE MAXIMUM RATINGS 5 ELECTRICAL CHARACTERISTICS 6 OPTICAL CHARACTERISTICS 7 BLOCK DIAGRAM 8 INTERFACE PIN ASSIGNMENT 9 TIMING CHART 10 OUTLINE DIMENSIONS 11 APPEARANCE STANDARD 12 PRECAUTIONS 13 DESIGNATION OF LOT MARK
SHEET No. 7B64PS 2701-TX43D51VC0CAA-1 7B64PS 2702-TX43D51VC0CAA-1 7B64PS 2703-TX43D51VC0CAA-1 7B64PS 2704-TX43D51VC0CAA-1 7B64PS 2705-TX43D51VC0CAA-1 7B64PS 2706-TX43D51VC0CAA-1 7B64PS 2707-TX43D51VC0CAA-1 7B64PS 2708-TX43D51VC0CAA-1 7B64PS 2709-TX43D51VC0CAA-1 7B64PS 2710-TX43D51VC0CAA-1 7B64PS 2711-TX43D51VC0CAA-1 7B64PS 2712-TX43D51VC0CAA-1 7B64PS 2713-TX43D51VC0CAA-1
PAGE 1-1/1 2-1/1 3-1/2~2/2 4-1/1 5-1/2~2/2 6-1/2~2/2 7-1/1 8-1/5~5/5 9-1/4~4/4 10-1/2~2/2 11-1/3~3/3 12-1/2~2/2 13-1/1
ACCEPTED BY:
PROPOSED BY:
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET NO.
7B64PS 2701-TX43D51VC0CAA-1
PAGE 1-1/1
2. RECORD OF REVISION
DATE
SHEET No.
SUMMARY
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET NO.
7B64PS 2702-TX43D51VC0CAA-1
PAGE 2-1/1
3. GENERAL DATA
3.1 DISPLAY FEATURES
This module is a 17” SXGA amorphous silicon TFT. The pixel format is vertical stripe and sub pixels are arranged as R (red), G (green), B (blue) sequentially. This display is RoHS compliant, TCP (Tape Carrier Package) technology and LED backlight are applied on this display.
Part Name Module Dimensions LCD Active Area Pixel Pitch Resolution Color Pixel Arrangement LCD Type Display Type Number of Colors Backlight Weight Interface Power Supply Voltage Viewing Direction
TX43D51VC0CAA 368.0(W) mm x 306.0(H) mm x 19.9 (D) mm typ. 337.92(W) mm x 270.336(H) mm 0.264(W) mm x 0.264 (H) mm 1280 x 3(RGB)(W) x 1024(H) dots R, G, B Vertical stripe Transmissive Mode; Normally Black Mode Active Matrix 16.7M Colors Edge Light Type with White LED 1600 typ. (g) 2-channel LVDS (LVDS:Low Voltage Differential Signaling) 5V for LCD; 12V for Backlight Super Wide Version (In-Plane Switching)
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET NO.
7B64PS 2703-TX43D51VC0CAA-1
PAGE 3-1/2
3.2 APPLICATION AND OTHERS
(1) This LCD module was designed and manufactured to be used in an air-conditioned room away from direct sunlight.
(2) This LCD module cannot be applied to an instrument which requires extremely high reliability and safety from its functions and precision. These instruments include medical equipment which affects life- and/or wealth-support apparatus.
(3) Any problems caused by a use with deviation from the conditions mentioned in this specification are not included in the warranty.
(4) Maintenance This LCD module and the aforementioned data may be changed without notice. When you demand maintenance parts, please inquire about the changes in advance.
(5) Repair We will replace or repair all defective modules if the relevant defect is caused by KOE. However, we will not take any responsibilities for defective modules after the expirat.