A1150

A1150, A1152, A1153, A1155, A1156, A1157, and A1158 Chopper-Stabilized, Two-Wire Hall-Effect Switches FEATURES AND BENEFITS AEC-Q100 automotive qualified High-speed, 4-phase chopper stabilization Low switchpoint drift throughout temperature range Low sensitivity to thermal and mechanical stresses On-chip protection □□Supply transient protection □□Reverse-battery protection □□On-board voltage regulator □□3 to 24 V operation Solid-state reliability Robust EMC and ESD performance Industry-leading ISO 7637-2 performance through use of proprietary, 40 V clamping structures Continued on the next page… PACKAGES 3-pin SOT23-W 2 mm × 3 mm × 1 mm (suffix LH) 3-pin ultramini SIP 1.5 mm × 4 mm × 3 mm (suffix UA) 2-pin ultramini SIP 1.5 mm × 4 mm × 4 mm (suffix UB) Approximate footprint DESCRIPTION The A1150, A1152, A1153, A1155, A1156, A1157, and A1158 comprise a family of two-wire, unipolar, Hall-effect switches, which are factory-trimmed to optimize magnetic switchpoint accuracy.These devices are produced on theAllegro™ advanced BiCMOS wafer fabrication process, which implements a high-frequency, 4-phase, chopper-stabilization technique. This technique achieves magnetic stability over the full operating temperature range, and eliminates offsets inherent in devices with a single Hall element that are exposed to harsh application environments. The A115x family has a number of automotive applications. These include sensing seat track position, seat belt buck...