Document
Global LCD Panel Exchange Center CPT ʳ
www.panelook.com CHUNGHWA PICTURES TUBES, LTD.,
RECORD OF REVISIONS
Revision No.
Date
Page
Description
Ver 1.0
2008/01/23
-- The first edition issued.
CPT Confidential
˅/26ʳ
CLAA320WF01_UD-HUI YING TUNG-SPEC-20080128
ʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center CPT ʳ
www.panelook.com CHUNGHWA PICTURES TUBES, LTD.,
CONTENTS
No Item
1 OVERVIEW 2 ABSOLUTE MAXIMUM RATINGS 3 ELECTRICAL CHARACTERISTICS 4 INTERFACE PIN CONNECTION 5 INTERFACE TIMING 6 BLOCK DIAGRAM 7 MECHANICAL SPECIFICATION 8 OPTICAL CHARACTERISTICS 9 RELIABILITY TEST CONDITIONS 10 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Page
4 5 6 11 14 19 20 22 27 28
CPT Confidential
ˆ/26ʳ
CLAA320WF01_UD-HUI YING TUNG-SPEC-20080128
ʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center CPT ʳ
1. OVERVIEW
www.panelook.com CHUNGHWA PICTURES TUBES, LTD.,
CLAA320WF01U is 32” color (80.04cm) TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, LVDS driver ICs, control circuit, backlight, and inverter. By applying 8 bit digital data, 1366*768, 16.7 million-color images are displayed on the 32” diagonal screen. General specification are summarized in the following table:
1.1 GENERAL INFORMATION
Item
Specification
Unit
Display Area
697.684(H) × 392.256(V) (31.51 inch diagonal) mm
Number of Pixels
1366×3(H)×768(V)
16:9
Pixel Pitch
0.51075(H) × 0.51075(V)
mm
Bezel Opening Area
703.6×398.3
mm
Color Pixel Arrangement
RGB Vertical Strip
Display Mode
Normally Black
Number of Colors
16.7M (8bits)
color
Wide View Tech.
E-MVA
Electrical Interface
LVDS
Total Module Power
114 (Typ.) (B/L with inverter105W)
W
Module Outline Dimension
Horizontal(H)
Vertical(V)
Depth without inverter (D) with inverter
760.0 (Typ) 450.0 (Typ) 38.0 (Typ) 45.0 (Typ)
mm mm mm mm
Module Weight
7500 (Typ)
g
Backlight Unit Surface Treatment
7U-CCFL
Hard coating, Anti-glare Surface-hardness: 3H
The LCD products listed on this document are not suitable for use of aerospace equipment, submarine cables, and nuclear reactor control system and life support systems. If customers intend to use these LCD products for above application or not listed in "Standard" as follows, please contact our sales people in advance.
Standard : Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tool, Industrial robot, Audio and Visual equipment, & Other consumer products.
CPT Confidential
ˇ/26ʳ
CLAA320WF01_UD-HUI YING TUNG-SPEC-20080128
ʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT
CHUNGHWA PICTURES TUBES, LTD.,
ʳ
2. ABSOLUTE MAXIMUM RATINGS
The following are maximun values which, if exceeded, may cause faulty operation or damage to the unit.
Item Power Supply Voltage For LCD Input Voltage of Inverter Invert Dimming BL on/off ESD for Connector ESD for Module Operation Temperature (Surrounding) Storage Temperature Delayed Discharge Time
Symbol VCC VBL VDIM BL ON VESD VESD Top Tstg TD
Min. -0.3 -0.3 -0.3 -0.3 -250 -15
0 -20 --
Max. 14.0 27.0 3.5 5.5 250 15 50 60
1
Unit Note
V V Vdc Vdc V *5) KV *5) к *1) *2) *3) *4) к *1) *2) *3) *4) sec *6)
[Note]
*1) The relative temperature and humidity range are as below sketch.(90%RHMax / TaЉ40к)
*2) The maximum wet bulb temperature Љ39к (TaЇ40к) and without dewing. *3) If you use the product in a environment which over the definition of temperature and
humidity too long, and it will effect the result of visible inspection.
*4) While the product operates in normal temperature range, the center surface of panel
should be under 60к.
Humidity Љ85%RH without condensation.
Relative Humidity Љ90% (TaЉ 40к)
Wet Bulb Temperature Љ39к (TaЊ40к)
ˌ˃ʸ
ˉ˃
Wet Bulb Temperature [C]ʳ
ˇ˃
˄˃ʳ 0
ˆ˃ʳ ˅˃ʳ
ˈ˃
ˉ˃ʸ ˇ˃ʸ ˄˃ʸ
Humidity [(%)RH]
Storage Operation
-20 ˃ʳ ˄˃ʳ ˅˃ʳ ˆ˃ʳ ˇ˃ ˈ˃ ˉ˃ ˊ˃ ˋ˃
Dry Bulb Temperature [C]
*5) Test Condition: IEC 1000-4-2 VESDt: Contact discharge to input connector; VESDC: Contact discharge to module.
*6) Delay lighting testing needs the volt above start voltage Vrms. Before the procedure tube needs typical lighting for 1 minute and stay in the temperature 25±2к for 24 hours and then testing in the same condition in dark room.
CPT Confidential
ˈ/26ʳ
CLAA320WF01_UD-HUI YING TUNG-SPEC-20080128
ʳ
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CPT
CHUNGHWA PICTURES TUBES, LTD.,
ʳ
3. ELECTRICAL CHARACTERISTICS
3.1 TFT-LCD MODULE
ITEM
SYMBOL
LCD Power Supply Voltage
VCC
Ripple Voltage
Vrpd
Rush Current
Irush
LCD Power Supply Current
White Black RGB stripe
.